Open your bottle of wine and pour a glass. Remove the eto stopper, and fully extend the neck (approx. 11cm)
Holding eto at an angle, decant your bottle through the neck.
Pour a glass: the long neck gently oxygenates the wine and its sharp lip ensures drip free pouring.
Replace the stopper and push the neck down. The valve automatically locks when it reaches the wine.
Store eto in a cool, dark place. It has been designed to fit perfectly into a fridge door.
Lift up the neck very slightly to release the seal, before pouring your next glass of wine.
Please wash before first use. Fully extend the neck. Unscrew the shoulder, and raise the shoulder up to the top
Lift and rotate out
Turn eto upside down and unscrew the valve out. (anti-clockwise)
Separate the red and black seals.
Hand-wash all 6 parts in hot water. Rinse and dry fully before assembly*
NB. Metal parts are not dishwasher safe.
Replace the red seal and the black seal.
Screw in the valve securely (clockwise)
NB. *Ensure the seals are fully air-dried before assembly
Guide the plunger in at a 45° angle.
Push inside (approx. 10cm) then screw on the shoulder and replace the stopper.
NB. Don’t ‘over tighten’ when screwing onto the glass